CTEK XC 800 6V Battery Charger

The CTEK XC800 is a switch mode charger with pulse maintenance and is one of a series of professional chargers from CTEK SWEDEN AB.

CTEK XC800 represents state-of-the-art technology within battery charging.  XC800 can be used to charge a multiple of lead-acid batteries (Wet, MF,GEL and AGM) from 1.2Ah to 32Ah.

The CTEK XC800 Battery Charger is ideal for use charging 6V batteries up to 32Ah.

Charging Phases

1. Bulk - Charging where 80% of the energy is returned. The charger delivers an almost constant current until the battery voltage reaches maximum level.
2. Absorption - Charging up to almost 100%. The charge current falls and the voltage is kept constant at the maximum level.
3. Pulse - Maintenance phase, where the charger delivers a pulse if the battery voltage drops. Charging varies between 95% and 100%. The battery receives a pulse when the voltage reduces.

The charger can be connected for months keeping the battery in good condition when not in use.

Features

• Three step , fully automatic switch mode model
• Charges 6V Lead acid Batteries (wet,gel,agm & MF) from 1.0Ah  to 32.0Ah
• Maintenance pulse charging increases battery life
• Pulse recovery for slight sulphated batteries
• Can be connected for long periods of time
• Complete with interchangeable connection leads, clamp and eyelet terminals
• Compact design with Thermal Protection

Specifications

• Nominal Voltage: 6V
• Charging Output: 7.2V
• Charging Current: 0.8A max
• Min / Max Battery Size: 1.2Ah - 32Ah for charging (100Ah conditioning)
• Type of Battery: 6V lead-acid (Wet, MF, AGM & GEL)
• Dimensions: 142 x 51 x 36mm (L x W x H)
• Casing: IP65 compliant (water splash & dust proof)
• Back Current Drain: <1mA
• Ripple: 10mV rms, 12mA (2%)